Cytogenetic evaluation and the association with polymorphisms of the CPY1A1 and NR1I3 genes in individuals exposed to BTEX

The gas station attendants are exposed daily to chemical agents that compose gasoline, such as BTEX (benzene, toluene, ethylbenzene, and xylene), and the exposure to these agents can cause a variety of effects on the human health. Among the various possible cell alterations associated with these exposures are the formation of micronuclei and of binucleated cells which are used as indicators of clastogenic action. Benzene, the main carcinogenic agent, is metabolized to more soluble forms and easily excreted by isoenzymes of cytochrome P450, such as CYP1A1. The CYP1A1 gene is highly polymorphic and one of its allele variations can be detected by the use of restriction endonucleasis MspI and is originated by the transition of a thymine by a cytosine (3798T>C), resulting in the polymorphic allele CYP1A1*2A. The objective of this study was to evaluate the cytogenetic damage induced by the exposure to BTEX and to associate it with the polymorphisms of the CYP1A1 and NR1I3 genes. Samples of exfoliated cells from the oral mucosa of 27 gas station attendants and from a control group were collected. The results found show that the group exposed to BTEX presents significantly higher alterations than those in the control group for micronuclei (MN; 6.85?±?1.33 vs. 2.96?±?1.91, P?<?0.001) and for the total of nuclear alterations observed (MN + binucleated cells (BNC); 9.59?±?4.73 vs. 5.07?±?2.21, P?<?0.001). When comparing the cytological alterations and the genotypes among the exposed individuals for the polymorphism 3798T>C of the CYP1A1 gene, homozygotes TT present MN + BNC significantly higher than carriers of the allele C (10.88?±?5.36 vs. 5.33?±?2.52, P?=?0.028). No association was observed in the control group or for the NR1I3 gene. These results show that molecular and cytogenetic data can be used in the future as tools to monitor individuals exposed to such compounds.     

Assessment of heavy metals in water samples and tissues of edible fish species from Awassa and Koka Rift Valley Lakes, Ethiopia

The Ethiopian Rift Valley Lakes host populations of edible fish species including Oreochromis niloticus, Labeobarbus intermedius and Clarias gariepinus, which are harvested also in other tropical countries. We investigated the occurrence of six heavy metals in tissues of these fish species as well as in the waters of Lake Koka and Lake Awassa. Both lakes are affected by industrial effluents in their catchments, making them ideal study sites. Mercury concentrations were very low in the water samples, but concentrations in the fish samples were relatively high, suggesting a particularly high bioaccumulation tendency as compared with the other investigated metals. Mercury was preferentially accumulated in the fish liver or muscle. It was the only metal with species-specific accumulation with highest levels found in the predatory species L. intermedius. Lower mercury concentrations in O. niloticus could be attributed to the lower trophic level, whereas mercury values in the predatory C. gariepinus were unexpectedly low. This probably relates to the high growth rate of this species resulting in biodilution of mercury. Accumulation of lead, selenium, chromium, arsenic and cadmium did not differ between species, indicating that these elements are not biomagnified in the food chain. Values of cadmium, selenium and arsenic were highest in fish livers, while lead and chromium levels were highest in the gills, which could be related to the uptake pathway. A significant impact of the industrial discharges on the occurrence of metals in the lakes could not be detected, and the respective concentrations in fish do not pose a public health hazard.     

Correlations between radiometric analysis of Quaternary deposits and the chronology of prehistoric settlements from the southeastern Brazilian coast

Natural gamma radiation measurements of sand deposits were carried out in order to study the chronology of prehistoric colonization of the Brazilian coast during the Holocene. The method employs thorium, uranium and potassium as tracers of the geological provenance of Quaternary deposits, where artificial shellmounds are found. The so-called sambaquis are archaeological settlements, characteristic of fisher-gatherers, specialized in the exploitation of shellfish. Our results show a considerable positive correlation between the formation of coastal deposits, based on cross plots of eTh/eU and eTh/K, and the antiquity of its prehistoric human occupation.     

Strategies for reducing the environmental impact of reprocessing mercury-contaminated tailings in the artisanal and small-scale gold mining sector: insights from Tapajos River Basin,Brazil

Worldwide, the environmental impacts of artisanal and small-scale gold mining (ASGM) are extensive. Annual losses from mercury, which is used to amalgamate gold, are in the range of 1000 tonnes, and at advanced sites, there is the additional threat of cyanide contamination.Recent developments in The Brazilian Amazon, an area populated by 200,000 small-scale gold miners, have the potential to reduce these impacts considerably. In the locality of Garimpo Ouro Roxo, miners are presently using amalgamation and cyanidation in vat-leaching. Each cycle typically recovers 50% of the gold and lasts 20 days (per tank), consuming around 3300 kg NaCN/month. A new process has been developed and implemented in a pilot plant in this area, involving gravity concentration followed by cyanidation in a ball mill. Concentrate leaching is conducted with a PVC capsule filled with activated carbon inserted in the cyanide solution in the mill. The cycle takes less than 24 h and recovers up to 98% of the gold in the concentrate. The main advantages of wide adoption of this method, apart from a reduced gold recovery cycle and improved recovery, include possible phase out of amalgamation altogether, and marked reductions in cyanide consumption (from current 22,000 kg–980 kg annually).     

Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Heavy-metal pollution assessment in the coastal lagoons of Jacarepaguá, Rio de Janeiro, Brazil

The Jacarepaguá lagoon receives the waste from 239 industries and domestic sewage. Bottom sediment analysis revealed that metal pollution is not spread over the lagoons but restricted to the discharge areas of the main metal-carrier rivers. Metal concentrations in superficial water showed the following concentrations values in ng/ml: Zn, 9.63+/-3.59; Pb, 0.61+/-0.43; Cu, 0.94+/-0.45; Mn, 12.7+/-8.0. Metal concentration in fish (average of seven different species) presented the following results, in mg/kg wet weight: Cr, 0.08+/-0.01; Cu, 0.4+/-0.15; Zn, 4.6+/-3.4; Fe, 2.4+/-1.3; Mn, 0.4+/-0.3. These results imply, considering fish consumption rate and the RfD (USEPA Reference Dose), that the local population is not exposed to undue health risks. Metal concentrations in the water may, however, increase due to their dissolution induced by pH and redox changes in the sediments.     

Cyanidation of mercury-rich tailings in artisanal and small-scale gold mining: identifying strategies to manage environmental risks in Southern Ecuador

In many countries, such as Brazil, Colombia, Ecuador, Indonesia, Venezuela and Zimbabwe, amalgamated tailings are leached with cyanide to recover remaining gold. This paper describes a recently completed study conducted at seven gold processing centers in Portovelo-Zaruma, Southern Ecuador, which involved consultation with local miners. The objective of the study was to understand the behaviour of mercury (with a focus on mercury loss) in artisanal gold mining operations through the evaluation of two cyanidation processes (Merrill-Crowe and Carbon-in-pulp), using a participatory approach. In order to assess the kinetics of mercury dissolution in cyanide, a bottle roll test was conducted in the laboratory. In the Merrill-Crowe cyanidation process, an average of 24.2% of metallic mercury was determined to be trapped at the bottom of the agitation tanks; 33.1% of mercury is lost in association with solid material and 11.7% is lost in solution. Approximately 31.0% of mercury in solution is sent to the zinc precipitation cells from which 27.8% is precipitated on the zinc shavings, with 3.23% remaining in solution. The mercury precipitated on to the zinc is lost to the atmosphere when the shavings are burned at 900 °C. In the Carbon-in-pulp (CIP) leaching system, 11.2% of the mercury is lost with the solid tailings; 31.6% of the mercury is associated with fine particles in suspension and 50.8% is likely dissolved. About 2.68% is trapped at the bottom of the tank and 3.72% is absorbed by the activated carbon. The bottle roll test revealed that mercury dissolution is directly proportional to cyanide concentration. At 10 g/ton of cyanide, approximately 42% of mercury was leached, whereas all gold was solubilized. During this study, miners recognized the risk associated with the cyanidation of mercury-rich tailings, and were aware of how much mercury is discharged to local streams and to the atmosphere. The active participation of miners in this study has led to the strengthening of their knowledge and awareness of mercury contamination, and has enhanced their understanding of the nature of the problem, as well as the weaknesses and strengths of the system they operate.     

Mining with communities

To be considered as sustainable, a mining community needs to adhere to the principles of ecological sustainability, economic vitality and social equity. These principles apply over a long time span, covering both the life of the mine and post-mining closure. The legacy left by a mine to the community after its closure is emerging as a significant aspect of its planning. Progress towards sustainability is made when value is added to a community with respect to these principles by the mining operation during its life cycle. This article presents a series of cases to demonstrate the diverse potential challenges to achieving a sustainable mining community. These case studies of both new and old mining communities are drawn mainly from Canada and from locations abroad where Canadian companies are now building mines. The article concludes by considering various approaches that can foster sustainable mining communities and the role of community consultation and capacity building.     

Antineoplastic drugs contamination of workplace surfaces in two Portuguese hospitals

Despite the classification as known or suspected human carcinogens, by the International Agency for Research on Cancer, the antineoplastic drugs are extensively used in cancer treatment due to their specificity and efficacy. As human carcinogens, these drugs represent a serious threat to the healthcare workers involved in their preparation and administration. This work aims to contribute to better characterize the occupational exposure of healthcare professionals to antineoplastic drugs, by assessing workplace surfaces contamination of pharmacy and administration units of two Portuguese hospitals. Surface contamination was assessed by the determination of cyclophosphamide, 5-fluorouracil, and paclitaxel. These three drugs were used as surrogate markers for surfaces contamination by cytotoxic drugs. Wipe samples were taken and analyzed by HPLC-DAD. From the total of 327 analyzed samples, in 121 (37 %) was possible to detect and quantify at least one drug. Additionally, 28 samples (8.6 %) indicate contamination by more than one antineoplastic drug, mainly in the administration unit, in both hospitals. Considering the findings in both hospitals, specific measures should be taken, particularly those related with the promotion of good practices and safety procedures and also routine monitoring of surfaces contamination in order to guarantee the appliance of safety measures.     

Challenges to measuring,monitoring, and addressing the cumulative impacts of artisanal and small-scale gold mining in Ecuador

Portovelo-Zaruma, Ecuador is an artisanal and small-scale gold mining (ASGM) region with approximately 6000 gold miners working with mercury and cyanide. Although artisanal gold mining (AGM) has taken place in Portovelo-Zaruma for centuries, highly mechanized small-scale gold mining (SGM) processing plants capable of increased throughput began being built in the 1990s. While there are benefits associated with ASGM, there are also negative impacts experienced by the miners and the surrounding communities. To take advantage of ASGM as a poverty-alleviating mechanism while reducing unwanted externalities, the cumulative impacts must be understood. Numerous challenges to measuring, monitoring, and addressing ASGM impacts result from the complexity of the impacts themselves, the nature of the gold mining as an informal industry, and the shortfalls in the current regulatory framework. These are discussed in the context of ongoing, unresolved issues including efforts to address trans-boundary water pollution, management of mining waste, and conflicts regarding priorities, ambiguities, and enforcement of existing regulations and policies. Internationally, interventions to address both AGM and SGM impacts have typically focused almost exclusively on technological changes through the elimination of mercury use. Our analysis suggests that to better address ASGM and their cumulative impacts in Ecuador, it will be beneficial to revisit the legal definitions of AGM and SGM. Additionally, promotion of information-based strategies including educational outreach programs and cross-scale and cross-level mitigation methods may also be beneficial. The success of these strategies to reduce ASGM-related cumulative impacts will depend on sufficient funding and the commitment of stakeholders.